Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Homeworks QS Devices losing power

  1. #1
    Junior Member
    Join Date
    Aug 2017
    Posts
    2

    Homeworks QS Devices losing power

    Hey everyone, I just activated a new Homeworks QS system and for some reason some of the HQRD-6NA's are losing power. The LED indicator lights go out and the device stops responding to local and programmed control. If the service switch is pulled and pushed back in it comes back to life and all is good. Originally I thought it might be a low wattage load issue but the devices on my smallest loads aren't doing it. There's over 100 devices on the system and maybe 10 have had this error. Anyone run into this before?

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello Irmoreilly,
    Thank you for your post.
    Are the load types LED? If so are they approved LEDs? www.lutron.com/led You can use this link to check compatibility. If your LED is not on our website then we cannot guarantee it will work correctly with the dimmer.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    2
    I have made adjustments to the load type in my programming as the bulb report card referred to but haven't been back to the site yet. Hoping the programming alterations will make the difference. Thanks. I'll post the outcome.

Similar Threads

  1. iOS app keeps losing my Geofencing settings
    By asherrick in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 11-19-2019, 11:14 AM
  2. Replies: 6
    Last Post: 05-30-2017, 11:23 AM
  3. HomeWorks - clock losing 5 mins/year
    By Mike AC in forum Troubleshooting - Legacy HW
    Replies: 6
    Last Post: 01-05-2016, 09:01 PM
  4. Time Clock Losing 10 minutes each day????
    By Lowkey5 in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 03-25-2015, 04:07 PM
  5. Verifing loads and devices in HomeWorks QS
    By darthcatcher5 in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 01-21-2014, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •