I installed a MSCL-OP153M (motion sensing switch) at the bottom of my basement steps, next to our entryway from the garage. I have installed a TGCL-153PH (mechanical switch) at the top of the steps. I want the motion sensing switch (MSCL-OP153M) to sense when we come in the house and turn our basement lights on. Everything seems to be working correctly except the lights come on twice. Imagine if you will...
- Lights in basement are currently off. Mechanical switch is "on" (at top of steps).
- Door opens, OP153M senses motion, lights turn on.
- The LED indicators on the OP153M show the lights powering up by lighting up 1, 2, 3, 4, 5, 6, 7 until 100%.
- But then the lights go off.
- And the they come on again the same way by lighting up 1, 2, 3, 4, 5, 6, 7 until 100%.
- After that, they stay on at 100%.
- After 5 min, the lights turn off.
- When motion is detected again, same thing happens (starting with step 3).
Can someone help me figure this out please?
Thanks!