Stand alone Switch and Sensor

[rhett7660]

Hello,

I currently have a Caseta setup in my house, however I don't need the controls for our walk in closet, so I would like to setup a stand alone system that turns the closet light on when there is motion and then off after a period of time.

Can someone recommend the parts that would be needed in order to accomplish this?

I thought about adding a smartthings hub, but I would rather not if I don't have to.

I noticed some folks around here have setup motion sensors as stand alone systems but they didn't mention what they actually used, hence my question.

Thanks

[rhett7660]

Just got off the chat line with Lutron, for those that are interested here is what you would need. I wanted a ceiling mounted motion sensor:

PD-6ANS with LRF2-OCR2b-P

To setup:
Press and hold the bottom button on the wall switch for 6 sec. and then press and hold the light bulb button on the sensor for 6 sec.

no app needed, standalone only.

[Blurum]

Good to know. I may have to a few things standalone to back of my 50 device issue. But it sounds like if we want to keep Caseta switches on a Lutron hub then a 3rd party hub and sensor are required. So Smartthings is a likely option and any ST compatible sensor . I use the Iris motion sensor.

[rhett7660]

Good to know. I may have to a few things standalone to back of my 50 device issue. But it sounds like if we want to keep Caseta switches on a Lutron hub then a 3rd party hub and sensor are required. So Smartthings is a likely option and any ST compatible sensor . I use the Iris motion sensor.

That is what it was sounding like from reading the various threads in this forum and others. I would need to add a second third party hub if I wanted to have it connected. This maybe the case with some other instances that I am thinking about, but for now, this should work out fine given I am only going to be using this for a few of my closets.