Thanks Thanks:  2
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: EventLog Analyzer

  1. #1

    EventLog Analyzer

    Is there anyone can help me ? what is the meaning of this code "02/06/14 03:36:00 PM Timeclock IRQ too fast/slow: Ticks: 0, Data:09df'f2b2 09df'f2b2"

  2. #2
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    These messages are just internal messages and do not indicate any issues.

  3. Thanks stevi thanked for this post
  4. #3
    So it is not indicate that there is problem with the timeclock ?
    Because the owner tell me that about 03:30 PM, 02/06/14 the exterior area is ON, and it mean it does not match with the existing timeclock, the exterior should be ON at 05:30 PM. is there any problem with my timeclock or is it just because there is someone pressing the exterior button ?

  5. #4
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    That message does not indicate any errors are occurring with the time clock. The most likely cause of this issue is due to a button being pressed that controls these lights. Looking at the Illuminations support file it will show you the addresses of the keypads that are being pressed along with the times they were pressed.

  6. Thanks stevi thanked for this post
    Likes stevi liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •