Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1

Thread: CCI toggle on a keypad

  1. #1
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    62

    CCI toggle on a keypad

    We received this question from a customer and thought others might be interested in the topic:

    I’m considering using the switch input closure CCI to toggle a variable - is this possible? The desired result would be a momentary push button where on the first push, a scene is turned on, and then on the second push, a scene is turned off.


    Yes - this is possible. You would need to set the button type on the input to "Toggle" and then program the variable states to the "Press On" and "Press Off" actions as you normally would. The LED logic on the CCI would depend on the application, but in the attached example, it is set to "Scene."
    Attached Files Attached Files

Similar Threads

  1. Manual Keypad Programming - Toggle
    By paulhanks in forum Programming - RA2
    Replies: 1
    Last Post: 12-24-2013, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •