Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Program PICO wireless to use with Keypad

  1. #1
    Junior Member
    Join Date
    Jul 2017
    Posts
    2

    Program PICO wireless to use with Keypad

    Hello,

    WE have a RadioRA2 system installed in the office

    In one room I have this key pad

    My buttons are programmed as follows

    All On
    Overhead
    Desk
    Overhead ON / Desk Off
    Overhead OFF / Desk ON
    All Off

    Can I manually program this with this pico wireless device



    Ideally I would like to set top button for Overhead ON / Desk Off, and "off" button for overhead Off/ Desk ON


    If SO How do I go about doing that


    Thanks

  2. #2
    Junior Member
    Join Date
    Jul 2017
    Posts
    2



    Attached Thumbnails Attached Thumbnails RadRA2seeTouchHybKey_01_hero.png   66335_1.jpg  

  3. #3
    Authorized Lutron Contributor
    Join Date
    Aug 2013
    Posts
    14
    Nameht,
    Thank you for your post.
    If your system was programmed via software you will not be able to add a Pico remote manfully.
    If your system was programmed via walk around, you can program the Pico using is link: http://www.lutron.com/TechnicalDocum...y/044-254b.pdf

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    518
    Ra2 systems are typically programmed using software that runs on Windows. You'd use that same software to add a Pico (by activating it) to the Ra2 main repeater. Once added the buttons on the Pico could be programmed to interact with any number of the other Ra2 devices on the repeater.

    The next question is, who set up the system for you and are they available to add the Pico and set up the programming? If not then you'd have to learn the software (free if you're on a main repeater with under 100 devices) and do it yourself.

Similar Threads

  1. Can you program the 6th button on a raise/lower RadioRA Classic Keypad?
    By RA2-Designer-Gal in forum Programming - Legacy RA
    Replies: 1
    Last Post: 02-16-2017, 04:17 PM
  2. Handle keypad button press from third party program?
    By ultravelocity in forum 3rd-party Integration - RA2
    Replies: 7
    Last Post: 08-03-2016, 07:05 PM
  3. Wireless Keypad Request
    By schalliol in forum General Discussion - RA2
    Replies: 3
    Last Post: 11-07-2015, 07:53 PM
  4. Pico with HWQS Wireless
    By Germany_FFM in forum Programming - HWQS
    Replies: 1
    Last Post: 07-16-2014, 05:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •