Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Panic Flash using VRX?

  1. #1

    Question Panic Flash using VRX?

    Is there a way to program a flashing light into a keypad button press marked "Panic". I heard it could be achieved using a VRX.

  2. #2
    Senior Member
    Join Date
    Jun 2013
    You could activate this feature, but then would not be able to release it. The Full/Flash sequence would then lock the keypads out- thus stopping you from releasing the scene. You can accomplish this using the LR3BHSW visor transmitter or another low voltage CCO device to activate the Full/Flash. These other devices will remain outside the Full/Flash and be able to deactivate the scene.
    Simple automation when DIY isn't working

Similar Threads

  1. Added a fan now lights flash
    By Dannyg in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 09-20-2016, 12:02 AM
  2. Lights flash when turned on
    By Dlilly85 in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 08-04-2016, 09:44 AM
  3. Lights flash once, don't come on
    By mustangcoupe69 in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 02-02-2016, 11:53 AM
  4. Bug? - Flash Output Causes whole system to flash
    By rdgerken in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 12-16-2013, 08:47 AM
  5. panic button
    By Craig W. in forum Programming - RA2
    Replies: 1
    Last Post: 05-22-2013, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts