Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Audio System Conrtrol Via Lutron HWQS

  1. #1

    Audio System Conrtrol Via Lutron HWQS

    Any recommendations are welcome I have some clients looking for an audio system they can control via Homeworks's built in functionality, what works best? rs232 or IP either protocol is ok.

  2. #2
    Depends on what you want to do. We are NuVo dealers, and it's pretty easy to control basic fonctions from the keypads (power, source select, all-off). The problem with the QS is that the repeat rate for 3rd-party commands is too slow for volume control (the nuvo VOL+ command adds a single dB, and it takes a lot of dBs to make a change).

    Some systems can simulate button press and releases on keypads (audio keypads). If you can define press and release commands on the lutron keypad to trigger volume keys presses and releases it should work.

  3. #3

Similar Threads

  1. Suggestions on how to integrate a split-system ductless HVAC system with RadioRA2
    By RA2-Designer-Gal in forum Design Assistance - RA2
    Replies: 4
    Last Post: 05-10-2017, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts