Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: QSE-CI-NWK-E and shades

  1. #1
    Junior Member
    Join Date
    Jun 2017
    Posts
    5

    QSE-CI-NWK-E and shades

    Hi,

    I am working on a Lutron integration project, using QSE-CI-NWK-E as controller interface.

    According to the protocol docs, the #SHADEGRP should be supported on QSE-CI-NWK-E.

    However, when issuing the command:
    #SHADEGRP,0x01053885,2
    I get
    ~Error,6

    Code 6 is "Unsupported Command", which I find a bit confusing.

    The #DETAILS for the controller is
    ~DETAILS,SN:0x023054ba,INTEGRATIONID:(Not Set),FAMILY:CONTROL_INTERFACE(6),PRODUCT:QSE(1),CO DE:8.60,BOOT:2.13,HW:1.0

    Note that I don't have shades set up on my test gear, but I would expect to get a "2 - Object does not exist" if the item isn't found ?

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello oyvindi,
    Thank you for your post.
    The #SHADEGRP command is only supported in Homeworks and Quantum. Refer to page 17 of the protocol guide for programming the QSE-CI-NWK-E.

  3. #3
    Junior Member
    Join Date
    Apr 2023
    Posts
    4
    Thanks for sharing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •