Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Pico w/ Shades

  1. #1

    Pico w/ Shades

    Have inclusive 6.3, I want to control a shade via a pico. When I am in "Program" tab and select the pico, the shade in the same room disappears from the right side menu (both are in the same room).

    Is there a problem or can we just not do this?

    Using a regular keypad in the same room, I get the results I want. Just the Pico will only allow me to select dimmers/switches....

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    The PICO you have selected in the "Add New Device" window is a PICO engraved for lighting control and will only control lights. Please select the PICO engraved for shading control under the "Shades" category in order to use this PICO for shade programming and control.

  3. #3
    OK, but I want to put lights on the same button(Scene)? Now I cannot add lights...

  4. #4
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    In the RadioRA2 system there not a way to have a pico control both lights and shades. The light pico will only control the lights and the shade pico will only control the shades.

Similar Threads

  1. Pico and Occ Sensors out of programming
    By mandbelectric in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 12-31-2013, 03:11 PM
  2. Pico Remote w/ Nightlight?
    By az1324 in forum General Discussion - Controls
    Replies: 1
    Last Post: 11-08-2013, 09:30 PM
  3. Old Pico
    By Ty W. in forum Programming - HWQS
    Replies: 1
    Last Post: 06-18-2013, 02:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •