-
Need advice for motion sensor
Hello,
I would like to install 2 motion sensors for my stairway.
One at the bottom and One at the top. Both should turn the same lights on. Is it possible?
Also I need a short range only. I would like to limit range at 10 ft only and time in 10,15 or 30 seconds only.
Lutron has a solution for this?
Regards
-
Originally Posted by
mestregroda
Hello,
I would like to install 2 motion sensors for my stairway.
One at the bottom and One at the top. Both should turn the same lights on. Is it possible?
Also I need a short range only. I would like to limit range at 10 ft only and time in 10,15 or 30 seconds only.
Lutron has a solution for this?
Regards
Hello mestregroda. Lutron does not have an in-wall solution for two sensors in a 3-way. If you need sensing at both ends, we would recommend using our Maestro Wireless family of controls, with wireless occupancy sensors.
MRF2-8S-DV - Master switch
MA-AS - Companion switch
LRF2-OCR2B-P-WH - Ceiling mounted wireless sensor.
You can have up to 6 sensors per master control.
Please see the following spec sheet for sensor coverage. We cannot limit the distance detected, but you can adjust the sensitivity.
http://www.lutron.com/TechnicalDocum...ry/369432a.pdf
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes