All,
I have three occupancy sensors in my master bathroom.
1 turns on the light
1 is over the toilet and turns on the exhaust fan
1 is in the shower and turns on the shower light and exhaust fan
I had to create three different rooms and put each sensor in a different room to get the sensor specific programming. It works great
How does it work when I have two sensors in different rooms both controlling the exhaust fan? I was in the shower today and the exhaust fan turned off. I believe it was due to the sensor over the toilet that had previously turned the fan on had seen no motion and turned the fan off. If I program a delay does that change things?
Thanks