Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Dynamic Keypad Mounting Frame

  1. #1
    Authorized Lutron Contributor
    Join Date
    May 2013

    Dynamic Keypad Mounting Frame

    We had a customer ask us information about the Dynamic Keypad's mounting frame such as its dimensions and if it was proprietary. We thought it would be good information to share with the forum community.

    The Dynamic Keypad's does not fit into a standard wall box such as the dimmers and keypads. Please see the attached image for the dimensions of the back box. Also attached is the installation guide providing our recommendations for installation.

    When ordering the Dynamic Keypad, the mounting frame will come with it. If you need to order just the mounting frame its part number is 4601003.
    Attached Thumbnails Attached Thumbnails dkp dimmensions.jpg  
    Attached Files Attached Files
    Last edited by Kevin P.; 01-02-2014 at 02:37 PM. Reason: adding attachments and spelling

  2. Thanks Vic F. thanked for this post
  3. #2
    Authorized Lutron Contributor
    Join Date
    May 2013

    For the dynamic keypad mudring mounting, you would now need to order:

    x1 24484827 - Mud Ring
    x2 4601003 - Mounting Clips

Similar Threads

  1. Dynamic Keypad Firmware Update
    By ekimla in forum Troubleshooting - HWQS
    Replies: 5
    Last Post: 11-11-2013, 10:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts