We have a client who has palladiom keypads installed in his house, most of them are 2 button keypads.
This is the programming client is requesting for 2 button keypads:
Astronomical Time Clock ( daylight saving )
Day scene : sunrise
Evening : 1 hour before sunset
Night : 2 hours after sunset
Plates Buttons - Scene - Function :
1. Lighting Scene 1/2/3
2. Lighting Off
*For Button 1:
-Press once recall Timed event according to time clock
-Repeat press cycle trough scene1-3
This is what I would do: create a single variable with 3 different states , day, evening and night. Program a time clock and attach it the variables according to time of the day. Select the keypad to program, change program type from normal to the single variable with the 3 states I have created. Program a scene according to time of the day, it doesn't seem too bad at this point...
This is where I get stuck, for Button 1, if a press it once it should run the scene according to time of the day, but how do I make the same button to cycle trough these 3 scenes? (day,evening, night)
For button 2 no problem, program single action button with all lights to 0%
Thanks in advance…