Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: 2 button palladiom keypads programming,

  1. #1
    Junior Member
    Join Date
    Jun 2017
    Posts
    5

    2 button palladiom keypads programming,

    We have a client who has palladiom keypads installed in his house, most of them are 2 button keypads.
    This is the programming client is requesting for 2 button keypads:


    Astronomical Time Clock ( daylight saving )

    Day scene : sunrise
    Evening : 1 hour before sunset
    Night : 2 hours after sunset
    Plates Buttons - Scene - Function :
    1. Lighting Scene 1/2/3
    2. Lighting Off

    *For Button 1:
    -Press once recall Timed event according to time clock
    -Repeat press cycle trough scene1-3



    This is what I would do: create a single variable with 3 different states , day, evening and night. Program a time clock and attach it the variables according to time of the day. Select the keypad to program, change program type from normal to the single variable with the 3 states I have created. Program a scene according to time of the day, it doesn't seem too bad at this point...

    This is where I get stuck, for Button 1, if a press it once it should run the scene according to time of the day, but how do I make the same button to cycle trough these 3 scenes? (day,evening, night)

    For button 2 no problem, program single action button with all lights to 0%

    Thanks in advance…

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello Milton C.,
    Thank you for your post.
    Program the scenes to a manual sequence and then program the manual sequence to the button press. Have each variable state start the respective manual sequence step for your scene.

  3. #3
    Junior Member
    Join Date
    Jun 2017
    Posts
    5
    Hi Blair S.,
    Thank you for replying to my post...

    I just programmed the keypads in software. I will be on site this coming Friday to make a transfer and test the programming
    Thank you once again

Similar Threads

  1. Button Programming For Venetian Blinds
    By jkvossen in forum Programming - Shades
    Replies: 6
    Last Post: 04-03-2023, 12:35 AM
  2. Programming keypads not working
    By maarten in forum Troubleshooting - Legacy RA
    Replies: 5
    Last Post: 05-25-2017, 02:08 PM
  3. Palladiom Keypads Faceplates
    By savimagc in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 03-21-2017, 03:25 PM
  4. Button Kits For Hybrid Keypads
    By jkvossen in forum General Discussion - HWQS
    Replies: 1
    Last Post: 05-06-2015, 08:09 AM
  5. My 5 button Hybrid Keypads (RRD-W5BRL) will not activate
    By MickPres in forum Programming - RA2
    Replies: 1
    Last Post: 06-05-2014, 04:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •