Hi everyone,
I am trying to set up an office with 2 daylight sensors, 276 16W LED T8 Tube lights (possibly TOGGLED brand, as they seem to be compatible with Lutron dimmers) as well as occupancy sensors. The office is divided into 2 sections and each are 2 stories high. I was thinking I could install one daylight sensor on each of these 2 sections, as the lower and upper floor share the same wall and the same angle toward the sun. Sorry if this is confusing.
Based on my research, I was thinking we could use four MRF2-6CL LED dimmers, one for each office space. As they can each support 9 companion dimmers, and each dimmer can support 150W (equivalent to nine 16W LED's), this would support the 276 LED T8 Tubes. I became confused trying to learn if some of these 9 companion dimmers could be occupancy sensors as well? I know there is the MSCL-OP153M LED multi-location occupancy sensor and dimmer.
Would this work? Does anyone have experience as to how the daylight sensor, main dimmer, and the companion dimmers/occupancy sensors would interact? Also, it might be good to have individual dimmers in each office (there are 16 offices), but that is not a necessity. I'm just trying to make sense of all the components. Maybe an Energy Savr Node would work?
Any help or suggestions are greatly appreciated. Thank you in advance