Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Grafik T Indicates Low Load after activation

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    6

    Grafik T Indicates Low Load after activation

    Need some help here. I have a RRT-G5NEW along with a companion dimmer controlling originally 2 ECS RFK6 65WE W27 120 REC (A21 11W 2700K dimmable bulbs), which are on a list of supported bulbs for the Maestro. I used this list as nothing is really on the Radio RA2 list for grafik T. The switches worked fine and did so even for about a day in a scenes. Yesterday I received a low load indication with the flashing lights. I tried pulling the FASS, even replaced bulbs with 100W incandescent. The error persisted. I then factory reset the dimmer, then it was happy and both the main and companion controlled the lights.

    So tonight I removed and then reactivated the dimmer. No issues yet. When I tried to turn on the lights with a scene, again, low load error, flashing lights even with an incandescent in one of the sconces. I factory reset and the lights work on both dimmers again.

    Any ideas what is going on with the scenes and the low load indication?

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello Darc_One
    Thank you for your post.
    Apologies for the delay in response. IF you can swap the dimmer with a know good dimmer from another location to see if the issue follows the device or stays at the location. This should allow you to determine the root cause.

Similar Threads

  1. Devices keep droping out of activation in 10.1/10.2
    By MitchE in forum Troubleshooting - RA2
    Replies: 13
    Last Post: 09-26-2016, 08:13 PM
  2. RRD-H6BR activation troubles
    By tedgallagher in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 07-22-2015, 03:14 PM
  3. Activation Issues
    By silvamarin in forum Programming - HWQS
    Replies: 4
    Last Post: 06-30-2015, 04:56 PM
  4. Unable to Start Activation
    By Armando B. in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 02-10-2014, 05:05 PM
  5. Replies: 1
    Last Post: 11-21-2013, 10:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •