Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Need Help with retrofit

  1. #1
    Junior Member
    Join Date
    Apr 2017
    Posts
    1

    Need Help with retrofit

    Hello, We are currently working on a project replacing 4 bulb fluorescent fixtures with LED panels.

    There are 16 fixtures in this room, currently 8 lights per 3 way switch. The 3 way switches are located on the North and East walls. We would like to provide dimming and turn on from 2 locations on the south wall instead. Can we run all 16 panels off of one circuit? We are wanting ability to dim, they are 0-10v drivers. What dimming system would we need.

    These are the lights we have... https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    Thanks for any help!

  2. #2
    Administrator
    Join Date
    Dec 2015
    Posts
    185
    Hello,

    As long as the 0-10V driver complies with IEC standard 60929 annex e.2, we would be able to fully control it. However, without testing of this specific fixture we would be unable to provide expected dimming performance, like dimming range. Lutron provides several 0-10v control options which are listed below.

    Single pole application only
    NTSTV-DV-XX rated up to 8A without requiring a power pack
    DVTV-XX with PP-DV

    Single pole or 3way applications
    DVSTV-XX rated up to 8A switching
    MS-Z1010-XX (Occupancy Sensor) or MS-Z101-V-XX (Vacancy Sensor Only)
    RMJ-5T-DV-B dimming module and PJ2-3BRL-Gxx-L01 Pico remote control
    3wire dimmer (ex: NTF-103P-XX, DVF-103P-XX) and GRX-TVI 0-10v interface

Similar Threads

  1. Somfy shade retrofit
    By thynes in forum General Discussion - Shades
    Replies: 1
    Last Post: 02-27-2017, 01:34 PM
  2. 4' Billiards Light LED Retrofit
    By olympustechgroup in forum Compatibility - LED
    Replies: 2
    Last Post: 12-14-2016, 09:28 PM
  3. How to retrofit Illumination keypad to QS system?
    By SparkyCoog in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 09-28-2016, 04:14 PM
  4. Where are all the LV LED recessed retrofit fixtures
    By mark2457 in forum General Discussion - LED
    Replies: 4
    Last Post: 12-20-2015, 10:16 AM
  5. Nicor LED retrofit can light bulbs flickering
    By strawburner in forum Compatibility - LED
    Replies: 1
    Last Post: 12-01-2015, 04:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •