Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: HELP and Scene Saver

  1. #1

    HELP and Scene Saver

    Hi everybody!

    I'm going to approach two new installations, and I have not been using HWQS software since release 4.xx.
    I've installed both latest stable 5.xx version and Beta 6.xx, but I was no able to find the help and the Scene Saver procedures.
    Am I missing something, or these items are not yet present?

    Gabriele.

  2. #2
    Senior Member
    Join Date
    Sep 2013
    Posts
    424
    From my experience so far, 'scene saver' could be described as an iphone/ipad app, I don't believe it is available at the keypads.
    I'm not aware of any help files like you might have found in illumination. Calling tech support may be your best bet aside from this forum; I've had good luck working through programming concepts with tech support on the phone.

  3. Thanks Armando B. thanked for this post
  4. #3
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Correct; for the HomeWorks QS system the scene saver capability will be achieved only by the Lutron Home Control+ application and level editing.

Similar Threads

  1. Fireplace inclusion in Scene based on temperature
    By dw886 in forum Design Assistance - RA2
    Replies: 4
    Last Post: 12-27-2013, 02:11 PM
  2. Scene turns on after off press....
    By guskousteris in forum Troubleshooting - RA2
    Replies: 12
    Last Post: 10-21-2013, 12:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •