Results 1 to 2 of 2

Thread: GRX-3106s lost communication with Wallstaions

  1. #1
    Junior Member
    Join Date
    Apr 2017
    Posts
    2

    GRX-3106s lost communication with Wallstaions

    I have 4 GRX-3106 GrafixEyes which connect to 6 Wallstations - 4 are SG-4s the other gwo are SG-2B
    A recent windstorm randomly interrupted power before the power was cut for 22 hours.
    Once power was restored the wallstations would not command the 3106 units.
    I can operate the lights from the 3106 units, all scenes appear to have been retained, including dimming functions. But there is apparently no voltage to the wallstaions.
    I've tried to reset communications by pressing the two commm buttons on the wallstations, but nothing happens. There are no LEDs lighting up on the wallstations.

    Any ideas?

  2. #2
    Junior Member
    Join Date
    Apr 2017
    Posts
    2
    CORRECTION: Grafikeyes are GRX-3104

Similar Threads

  1. Intermittent Communication Failure on DPM
    By sergiobaiao in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 03-14-2017, 10:31 AM
  2. Disconnect device or stop communication
    By franlog in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 07-06-2016, 11:50 AM
  3. Grafik QS and switch lost "connection" and can't reactivate
    By djmax in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 05-24-2016, 11:40 AM
  4. Switching to LED lights with Grafik Eye 3106s
    By nikkisun2011 in forum General Discussion - LED
    Replies: 5
    Last Post: 01-20-2015, 09:33 AM
  5. LHC+ 6.0 has lost conditional ''feedback''
    By digit1 in forum Troubleshooting - Legacy HW
    Replies: 4
    Last Post: 04-22-2014, 07:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •