Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: LED Logic

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    2

    LED Logic

    Ok I so normally I have no problem with conditions but I am having problems with a simple one. I have a QS system that I want to make the button led to turn on/off with a button press/release and blink when held. While blinking I want to turn the raise/lower buttons into volume control for a 3rd party system. I have tried to make all sorts of conditions including trying to use sequences. I know you have to use a variables but I can't remember if you have to make an "on" variable and a "off" variable with both on default. I have looked at other threads and try those but still can't figure it out. Thanks for the help in advance.

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello gibbykaro,
    Thank you for your post.
    You are welcome to send a detailed description of what you want to accomplish in your programming to hwsupport@lutron.com and we can send you a sample file with the programming.

  3. #3
    Junior Member
    Join Date
    Mar 2017
    Posts
    2
    Great Thank you.

Similar Threads

  1. What is the difference between different LED Logic options
    By Craig W. in forum Design Assistance - HWQS
    Replies: 6
    Last Post: 04-15-2019, 08:33 PM
  2. Keypad LED Logic - Help
    By John Conley in forum Programming - HWQS
    Replies: 5
    Last Post: 02-15-2016, 07:28 AM
  3. Led Logic problem.
    By skalman in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 08-31-2015, 09:37 AM
  4. Conditional Logic
    By skalman in forum General Discussion - HWQS
    Replies: 0
    Last Post: 08-27-2015, 02:54 AM
  5. LED logic not functioning - qs 5.2.0
    By totesthouse in forum Troubleshooting - HWQS
    Replies: 3
    Last Post: 11-06-2013, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •