Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Version 10.7 software still has upload issues

  1. #1
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587

    Thumbs up Version 10.7 software still has upload issues

    I upload once and have no errors. I add 2 dimmers and upload - 8 errors.
    I click retry and 11 errors, some new some old.
    I click retry and 4 different errors.
    I click retry and 28 errors.
    I click retry and 17 errors.

    Not to mention each retry takes a minimum of 30 minutes.

    Let me guess.... "it's a network issue?"
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  2. #2
    When you say network issue are you referring to the often intended "computer networking"? Or did you mean the Clear Connect RF network, or the QS Link network, or perhaps some other network?

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    433
    Quote Originally Posted by randyc View Post
    I upload once and have no errors. I add 2 dimmers and upload - 8 errors.
    I click retry and 11 errors, some new some old.
    I click retry and 4 different errors.
    I click retry and 28 errors.
    I click retry and 17 errors.

    Not to mention each retry takes a minimum of 30 minutes.

    Let me guess.... "it's a network issue?"
    I have used 10.7 since its release with no issues. However I never hit the retry failed devices button I always do a new transfer. Im sure people would love to help but more info needed on the issue.

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Uploads have been problematic since the day Lutron introduced uploads via Ethernet. Their go to excuse is, "it's the network." Not Clear Connect, not the QS Link, and not some other network.

    I've only been doing Lutron for 18 years so forgive me but I am tired of it. I also do Crestron, Vantage and Control 4 lighting and upload errors are the exception not the rule. Ethernet has been around for 40 years. It shouldn't be that hard.

    This system has 366 devices in it. Doing a new transfer for 6 or 8 errors is not an acceptable option.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  5. Likes johnmax liked this post
  6. #5
    So when you say it still has issues, I am led to think you have been getting numerous errors during transfers for various prior software versions. Are the errors occurring with devices only on a specific processor link? Has it remained consistent across different software revs?

  7. #6
    Senior Member
    Join Date
    Oct 2013
    Posts
    433
    Quote Originally Posted by randyc View Post

    I've only been doing Lutron for 18 years so forgive me but I am tired of it. I also do Crestron, Vantage and Control 4 lighting and upload errors are the exception not the rule.

    This system has 366 devices in it. Doing a new transfer for 6 or 8 errors is not an acceptable option.
    Ive also been doing Lutron except a lot more then 18 years I also do Crestron and Control4. I guess there excuse is no different then Crestron saying use Package switch it will work better.

  8. #7
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by ekimla View Post
    So when you say it still has issues, I am led to think you have been getting numerous errors during transfers for various prior software versions. Are the errors occurring with devices only on a specific processor link? Has it remained consistent across different software revs?
    The errors seem to be mostly, but not exclusively, RF devices. This particular job has 12 repeaters in it and is laid out by floor so there are 3 repeaters for ~3-4000 sqft.

    It's also frustrating that when I click "retry" errors pop up that weren't there before. Why is it retrying devices that didn't have errors before?

    It has been a while but I don't remember these issues with RS232 uploads. It started when they added Ethernet upload capability.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Post Upload
    By mcignarella in forum Programming - HWQS
    Replies: 0
    Last Post: 02-21-2017, 05:59 PM
  2. devices not working after an upload...sometimes...
    By jkvossen in forum Troubleshooting - HWQS
    Replies: 5
    Last Post: 06-28-2016, 01:43 PM
  3. Issues with latest firmware/8.0 and app version
    By totalcontrol in forum General Discussion - RA2
    Replies: 14
    Last Post: 02-02-2015, 04:37 PM
  4. Current version of Homeworks Illumination Software
    By Imaohw in forum General Discussion - Legacy HW
    Replies: 3
    Last Post: 08-19-2014, 01:05 AM
  5. Ra2 Issues Opening the BOM on the Software
    By Armando B. in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 03-03-2014, 05:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •