Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Two Main Repeaters for Two RS232 Integrations

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    10

    Two Main Repeaters for Two RS232 Integrations

    Hi. I am designing a RA2 system that will include fewer than 100 devices. I plan to use some of the keypads to trigger Somfy shades. Somfy sells a device that integrates with the Main Repeater through the RS232 port to accomplish that. However, I'd also like to integrate the system with a Leviton/Hai OmniPro2 as I've done elsewhere. That is also accomplishes via the Main Repeater's RS232 port.I'm wondering if I can have such a set up (presumably) by using two Main Repeaters. I don't need the second repeater because of the device limitation but only to have a second RS232 connection. Of course, for this to work properly, both controllers (the Somfy and the OmniPro) will need to "see" all of the devices controlled by either of the two Main Repeaters. Does anybody know if that will work?Thanks.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,958
    It should. Lutron broadcasts everything, everywhere. If you press button 1 on keypad 1, Somfy should recognize that as a command to do something while HAI should ignore it. Both systems should be able to ignore commands that don't apply to them as they will see lots of dimmer and button presses that don't apply.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Multiple Main Repeaters
    By bluemanta in forum Design Assistance - RA2
    Replies: 6
    Last Post: 09-16-2019, 01:35 AM
  2. Number of Main Repeaters using Inclusive Software
    By dbasha in forum General Discussion - RA2
    Replies: 5
    Last Post: 10-24-2018, 12:00 PM
  3. Maximum number of Aux repeaters in a 2 MAIN-REP arrangement
    By jfine in forum Design Assistance - RA2
    Replies: 4
    Last Post: 07-13-2017, 10:45 AM
  4. With two main repeaters will the console report the same data on both?
    By wkearney99 in forum 3rd-party Integration - RA2
    Replies: 9
    Last Post: 02-27-2016, 08:11 PM
  5. Two Main Repeaters and Device Separation
    By Armando B. in forum Best Practices - RA2
    Replies: 6
    Last Post: 01-23-2016, 02:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •