Thermostat

[fadel]

Dear
I have homeworks qs system and I am thinking to install lutron palladiom thermostat,please if you could support me with any information how to link this thermostat to my HVAC system and control it from iPad application.
Thanks

[digit1]

this is very new- not yet released in Homeworks QS but it is now showing up as a future release in Beta 11.0.6 software. From what I can see so far in the beta software, you'll need the Palladiom thermostat in the room with both thermostat wiring and QS link wiring, with a Lutron Fan Coil Unit controller in the backroom at the air handler. If you'd like to learn more about these devices you'll probably do best searching for Lutron's MyRoom thermostat info, as that seems to be where the hardware is a current release.

[Blair S.]

Hello,
Here is a link to the spec sheet for the thermostat. I hope this helps.
http://www.lutron.com/TechnicalDocum...ry/3691033.pdf

[AndyM]

After scanning this PDF (Thanks for linking it!), I'm making the assumption that this new setup is QS wired only (unlike the wireless SeeTemp setup), thus only suitable for new construction or retro where you can get wires?

[Blair S.]

AndyM,
You are correct. This device lives on the QS link.

[AndyM]

AndyM,
You are correct. This device lives on the QS link.

That's a bummer... Thanks for the info.