Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Homeworks and Caseta

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    8

    Homeworks and Caseta

    Dear Freinds

    I am new to lutron and i need some support please.

    1)i have this wireless thermostat http://www.carrier.com/residential/e...at-tp-wem01-a/ ,connected and controlled by
    Lutron Caseta Smart Bridge ,my question is it possible to integrate the Caseta with lutron Homeworks HPQ6-2 in order to be able to control the thermostat from the main Lutron application.

    2)if not,is there another way in order to connect this wireless thermostat (or Nest Thermostat) to my main homeworks application.

    Thanks
    Regards
    Fadel

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello fadel,
    Thank you for your post.
    You can not integrate the Caseta system into the Homeworks QS system.
    The Homeworks QS system will need a Lutron Connect bridge, similar to the Caseta bridge. This will allow integration with Honeywell and Nest wifi thermostats. The thermostat you have linked is not supported at this time.

  3. #3
    Lutron Caseta is designed for wireless control of lights, shades, and temperature, and it operates independently of Lutron Homeworks QS or HPQ systems. However, there might be some integration possibilities based on the specific









    pico park

  4. #4
    Junior Member
    Join Date
    Nov 2023
    Posts
    4
    Lutron Homeworks is a comprehensive lighting control system, and its integration capabilities may vary depending on the specific model and version you have. While Lutron offers integration with various third-party devices, including thermostats, it's essential to consult the documentation or contact Lutron support to confirm compatibility and available integration options for your specific Homeworks model.
    sbikidi toilet

Similar Threads

  1. Upgrading HomeWorks Interactive to HomeWorks Illuminations
    By Armando B. in forum Design Assistance - Legacy HW
    Replies: 2
    Last Post: 03-19-2019, 02:52 PM
  2. Controlling HomeWorks QS using HomeWorks Illumination
    By Armando B. in forum 3rd-party Integration - Legacy HW
    Replies: 6
    Last Post: 03-27-2015, 10:40 AM
  3. Using HomeWorks QS to Control a HomeWorks Illumination System
    By Armando B. in forum 3rd-party Integration - HWQS
    Replies: 9
    Last Post: 01-23-2015, 05:31 PM
  4. Replies: 2
    Last Post: 12-11-2013, 05:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •