would like to have three occupancy switches wired in parallel. when one or more of the three switches are closed then power goes to the load. anybody foresee a problem in using multiple MS-OPS2's in this way. thanks, Paul
would like to have three occupancy switches wired in parallel. when one or more of the three switches are closed then power goes to the load. anybody foresee a problem in using multiple MS-OPS2's in this way. thanks, Paul
Hello,
Lutron does not recommend using multiple wired occupancy sensors to control the same load. We would consider a Maestro Wireless with Radio Powr Savr sensors solution for this application.