Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: Coolmaster and Lutron Home+ App

  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    9

    Coolmaster and Lutron Home+ App

    Hi,

    I have done up the integration of the Coolmaster and Lutron Homeworks QS.

    I have about 40 Fan Coil Units.

    On the Lutron Home+ App, when i click on a room temperature button, i will see all the FCUs in the whole house. Is there a way that i only see the FCU for that particular room only?

  2. #2
    Junior Member
    Join Date
    Mar 2016
    Posts
    11
    As I remember, you just add the load into the room where you want to see it rather than all in one place.

  3. #3
    Junior Member
    Join Date
    Mar 2017
    Posts
    8
    Hi vwerke
    I have homeworks qs system and i want to use coolmaster but please can you tell me which HVAC system you have and what thermostat you are using?i am thinking to use palladiom lutron thrrmostate with my carrier duct split units.
    Your support is highly appreciated
    Regards

  4. #4
    Junior Member
    Join Date
    Mar 2016
    Posts
    11
    we used Heatmiser stats over rs485 and Coolmaster covers all of the main VRV/VRF systems available. have a look www.coolautomation.com

  5. #5
    Junior Member
    Join Date
    Mar 2017
    Posts
    8
    Thanks for reply,the client recommand lutron palladiom thermostat ,is it possible to integrate with coolmaster in order to control my hvac system
    http://www.lutron.com/en-US/general/...os/myRoom.aspx

    Regards
    Fadel

  6. #6
    Senior Member
    Join Date
    Sep 2013
    Posts
    424
    Quote Originally Posted by vwerke View Post
    Hi,

    I have done up the integration of the Coolmaster and Lutron Homeworks QS.

    I have about 40 Fan Coil Units.

    On the Lutron Home+ App, when i click on a room temperature button, i will see all the FCUs in the whole house. Is there a way that i only see the FCU for that particular room only?
    In short, no. It's an unfortunate design of Home Control Plus. Not sure if Lutron Connect App works the same way, I will check.

  7. #7
    Junior Member
    Join Date
    Dec 2013
    Posts
    9
    Quote Originally Posted by fadel View Post
    Thanks for reply,the client recommand lutron palladiom thermostat ,is it possible to integrate with coolmaster in order to control my hvac system
    http://www.lutron.com/en-US/general/...os/myRoom.aspx

    Regards
    Fadel
    Hi Fadel,

    Sorry for late reply. Yes we use the Coolmaster Net for most of our project.

    - - - Updated - - -

    Quote Originally Posted by fadel View Post
    Thanks for reply,the client recommand lutron palladiom thermostat ,is it possible to integrate with coolmaster in order to control my hvac system
    http://www.lutron.com/en-US/general/...os/myRoom.aspx

    Regards
    Fadel
    Hi Fadel,

    Sorry for late reply. Yes we use the Coolmaster Net for most of our project.

  8. #8
    Hi,

    This is my first time integrating Lutron with a Coolmaster. I have followed the app note, step by step. But, I'm still having issues.

    Feedback doesn't work in the Lutron app. Every time I change a setpoint in the app or in a keypad, the setpoint in the Coolmaster goes to 50 instead of the desired value.

    Coolmaster works fine though the Coolmaster app. The system being controlled is a Mitsubishi electric system.

    I have 10 zones, I'm using L1.001 to L1.011as the UID numbers in the Lutron QS program. Is this correct?
    Changing the HVAC mode and Fan mode through the Lutron app works ok (One way - No feedback).


    Any ideas?
    Can someone share a working program to compare?

    Thanks in advance for the help

Similar Threads

  1. Nest controlling Lutron Home/Away
    By gt3mike in forum 3rd-party Integration - RA2
    Replies: 7
    Last Post: 06-14-2017, 12:43 PM
  2. GeoFencing / HomeKit (Home App) / Lutron App
    By agarabaghi in forum General Discussion - CAS
    Replies: 2
    Last Post: 09-14-2016, 07:26 PM
  3. Guide for 3rd Party HVAC (Coolmaster)
    By jonerdimatulac in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 07-29-2016, 03:53 AM
  4. Home kit using Lutron
    By Squill in forum General Discussion - CAS
    Replies: 10
    Last Post: 03-29-2016, 08:46 PM
  5. Customizing Lutron Home App+
    By Jase21 in forum General Discussion - HWQS
    Replies: 3
    Last Post: 04-21-2014, 11:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •