Help connecting Luton Caseta Wireless

[wbblackwell]

I am trying to connect a Luton Caseta Wireless switch to replace a Leviton VPT24. The problem is the VPT 24 has 4 wires even though this is a single pole switch. In the existing Leviton VPT24 I have

From the box :

a black wire which goes to the Black wire on the VPT24
A white wire which goes to a white wire on the VPT24
A Black wire which goes to the Red wire on the VPT24
and a ground

I am not sure how to connect these wires to the Lutron Caseta. Help? Typical diagram for VPT24 is below.

Walter

[Sawdust]

What Caseta switch are you using? In many Caseta installs the white neutral wire will not be used. So you will use the black, red and ground connections.

[wbblackwell]

What Caseta switch are you using? In many Caseta installs the white neutral wire will not be used. So you will use the black, red and ground connections.

It is a Casseta Wireless modelPD-6WCL.

[Sawdust]

It is a Casseta Wireless modelPD-6WCL.

In this case you will not be using the Neutral wire (white) just cap it off.

[wbblackwell]

In this case you will not be using the Neutral wire (white) just cap it off.

Thanks very much. Perfect.