Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Lutron dimmable driver (LTEA4U1UKL-AV120) not working with RRD-10ND - need help!

  1. #1

    Lutron dimmable driver (LTEA4U1UKL-AV120) not working with RRD-10ND - need help!

    My electrician installed the LED lights with a RRD-10ND. There seems to be a problem with dimming. I specifically bought a Lutron dimmable LED driver (LTEA4U1UKL-AV120) thinking it would be compatible with the RRD-10ND dimmer. The dimmer doesn’t dim the lights. It’s either on or off. Also, the rocker on the dimmer doesn’t have an effect on the lights.

    Anyone know if the RRD-6NA will work with this driver?

    Greatly appreciate any input.Tried to stick with Lutron products and wound up with an issue.

  2. #2
    Quote Originally Posted by totalcontrol View Post
    My electrician installed the LED lights with a RRD-10ND. There seems to be a problem with dimming. I specifically bought a Lutron dimmable LED driver (LTEA4U1UKL-AV120) thinking it would be compatible with the RRD-10ND dimmer. The dimmer doesn’t dim the lights. It’s either on or off. Also, the rocker on the dimmer doesn’t have an effect on the lights.

    Anyone know if the RRD-6NA will work with this driver?

    Greatly appreciate any input.Tried to stick with Lutron products and wound up with an issue.
    http://www.lutron.com/TechnicalDocum...369543_ENG.pdf

    Check page 32 with compatible list. Says to set low and high end trim levels 35% and 99% respectively on a 10ND

    "Set Device type to “INC/MLV Neutral Dimmer”; Set High-End Trim to 99%; Set Low-End Trim to 35%"
    This needs to be done in the software.

  3. #3
    A RRD-6NA will also work. Doesn't look like a lutron issue, just settings need to be programmed

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    426
    What made you choose that driver?

  5. #5
    Junior Member
    Join Date
    Oct 2013
    Posts
    20
    How many fixtures do you have wired to it... the + and - from the fixture to the driver might be reversed...

  6. #6
    Quote Originally Posted by troltgen View Post
    How many fixtures do you have wired to it... the + and - from the fixture to the driver might be reversed...
    If polarity is reversed to led/light engine usually they don't light up. But you are right about load amount, its only rated for 40w, @totalcontrol needs to look over that to.

Similar Threads

  1. LED Dimmable Driver from Hafele
    By totalcontrol in forum Programming - RA2
    Replies: 2
    Last Post: 12-26-2016, 08:19 PM
  2. Lutron Hi-lume A-Series 1% dimming LED driver
    By PruTodd in forum Lutron Hi-Performance LED Driver - LED
    Replies: 0
    Last Post: 10-04-2016, 02:13 PM
  3. MoreRA2 LED issues - with Lutron LED driver
    By totalcontrol in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 04-07-2016, 08:13 PM
  4. Lutron DVCL-153P-WH Diva Dimmable CFL/LED dimmer for LED strip lighting
    By CharlesDickens in forum Compatibility - LED
    Replies: 1
    Last Post: 07-20-2015, 02:17 PM
  5. dimming performance with Lutron LED driver
    By harrykao in forum Performance Issues - LED
    Replies: 0
    Last Post: 02-21-2015, 01:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •