Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Sivoia QS Wireless and Wired Shades

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    22

    Question Sivoia QS Wireless and Wired Shades

    I have an existing stand-alone Sivoia QS project with Horizontal Sheers that are all currently wired to a PNL-10. I have 3 different areas with 3 separate wired keypads (QSWS2-5BRL). In one of the areas, the client wants me to remove one large sheer and replace with 2 smaller sheers (currently the only EDU programmed to the keypad). The problem is I only have one 18/4S ran to the window. Is it possible for me to order the new sheers as QS Wireless and a wireless keypad (QSWK4-5BR) and still make it work? I was planning on powering each shade from the PNL-10 with 2 wires each. I would purchase the SOLA power supply (per application note 406) to power the keypad.

    The other two keypads / shades would stay wired and programmed as is.

    Thanks!

  2. #2
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    635
    This would work. You could program the two QS Wireless shades with the QSWK4 keypad, but there wouldn't be any way of having the wireless keypad controlling the wired shades, nor the wired keypads controlling the wireless shades.
    It would be its own local system.
    If you are looking to control them all together, you would have to convert these into a Homeworks QS system wirh a wired link, and an RF link.

Similar Threads

  1. Replies: 3
    Last Post: 05-18-2017, 12:57 AM
  2. Lutron App for Caseta Wireless and Sivoia QS Wireless Shades
    By oleggold in forum Programming - CAS
    Replies: 1
    Last Post: 11-05-2016, 11:43 PM
  3. Sivoia QS Wireless Power Options?
    By waveform in forum Design Assistance - Shades
    Replies: 2
    Last Post: 10-15-2013, 12:48 PM
  4. Sivoia QS Wireless Control
    By waveform in forum Design Assistance - Shades
    Replies: 1
    Last Post: 10-15-2013, 10:05 AM
  5. Integrating Sivoia QS wired/wireless shades with HW Illumination
    By Blair S. in forum 3rd-party Integration - Legacy HW
    Replies: 0
    Last Post: 07-29-2013, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •