Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Curved Drapery Track

  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    2

    Curved Drapery Track

    When splicing a single radius curved track is the required 18" straight section at the joint unseemly?

  2. #2
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    William,

    The 9” straight section at each end of the spliced track is required for the proper functionality of the drapery track due to the specific geometry of the splice. This is an added measure to ensure that there will be consistently smooth travel over the splice joint.

Similar Threads

  1. Hampton Bay Track Lighting
    By Anna W. in forum Design Assistance - Controls
    Replies: 0
    Last Post: 05-07-2013, 10:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •