I just installed some caseta in-wall dimmers, replacing some lutron non-caseta switches that already were there. After turning the power back on, all seemed to be working fine, but now the lights turn off and on randomly. One room seems pretty stable (only turns off for a couple seconds at a time every few minutes), but another room is much less stable (turns off for much longer and more often). I'd read some other posts in the forum, but many of those seem to have extenuating circumstances (i.e. Turning on a hair dryer or non-standard wiring). Mine should have been a simple swap out especially since the previous light switch was already lutron. Any help? Thank you.