Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Help with switch choice

  1. #1
    Junior Member
    Join Date
    Dec 2016
    Posts
    8

    Help with switch choice

    Hi im looking for a Caseta switch for a switch that is a 3 way connected to 6 fixtures of NICOR LED ACW-20 (4' led shop lights)
    I have tried the switch that came with my kit (PD-6WCL) and a pico (PJ-3BRL) in 2nd location but it doesn't seem to be working at all, the LED's on switch light up and move but I only got the lights to blink once. I wired the switch as per instructions.
    is this the proper switch? I have read people changing the wiring to the switch but want to make sure first.
    also if it helps I don't care if they dim or not just looking for caseta control for on/off.
    thanks

  2. #2
    Junior Member
    Join Date
    Dec 2016
    Posts
    8
    If it helps the Nicor spec say it draws 39W x 6 is 234w

  3. #3
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    That particular fixture dims via 0-10V, which means the line voltage dimmer you have would not work. You would need a PD-10NXD-WH to run the GRX-TVI to dim those fixtures. If you are just using this for this room and not on a system, you could run two Picos with the TriPak RMJ-5T-DV-B.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

Similar Threads

  1. Switch Choice for bathroom heater/fan/light
    By Corey in forum General Discussion - RA2
    Replies: 6
    Last Post: 09-16-2016, 09:30 PM
  2. Caseta ON/OFF Switch and normal toggle switch
    By hgmobile in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 05-29-2016, 09:12 AM
  3. Load choice selection for mains dimming LED
    By jimathome in forum General Discussion - HWQS
    Replies: 1
    Last Post: 02-08-2016, 07:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •