Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: SCT and roman shades

  1. #1
    Junior Member
    Join Date
    Oct 2016

    SCT and roman shades

    Hi all

    First timer here, RA2 and QS dealer with experience selling/installing honeycomb and roller shades.

    I'm using SCT to spec a few roller shades for a project and the client is asking about adding roman shades for the bedrooms. I went into the software and it looks like it adds a "kit" which is a roller, hardware and brackets but no fabric. What am I missing?

  2. #2
    Senior Member
    Join Date
    Sep 2013
    You're missing a 'work room' - Lutron doesn't have a turn-key Roman Shade solution. They can provide the hardware to convert a Roman Shade to a QS drive (known as a motor to the rest of the world). You or the client can source a Roman Shade and then I'd suggest you find a window treatment fabrication company (work room) that can retrofit the QS Roman Shade Kit to the Roman Shade. That same fabrication company might be able to provide the entire system turn-key for you.
    If you don't have a work room, try contacting Quotes at Lutron or your sales rep- they may be able to connect you with a custom fabricator in your area.

  3. Likes SDR-Mike liked this post

Similar Threads

  1. Jumping issue with Roman Blind or Curtains
    By battaglini in forum Troubleshooting - Shades
    Replies: 3
    Last Post: 12-30-2014, 06:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts