Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: WPM as a Switch

  1. #1
    Junior Member
    Join Date
    Sep 2013
    Posts
    25

    WPM as a Switch

    I am trying to use a WPM as a swtich in 2 of the zones, i have programm it with the 1 and 5 buttons, tupe of load (set it to Non DIm) i saved it, but it does not keep it in memory after power goes off, any ideas, thanks in advance

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello savimagc,
    Thank you for your post.
    I am not %100 clear on what you mean. The WPM should have a programming database from the HWQS system. One thing I'd like to mention is that a non dimmed load will require a switching interface if being controlled form a WPM. If you require further assistance please send in a support file to hwsupport@lutron.com

  3. #3
    Quote Originally Posted by Blair S. View Post
    Hello savimagc,
    Thank you for your post.
    I am not %100 clear on what you mean. The WPM should have a programming database from the HWQS system. One thing I'd like to mention is that a non dimmed load will require a switching interface if being controlled form a WPM. If you require further assistance please send in a support file to hwsupport@lutron.com
    Which switching interface should be used with the WPM when controlling non-dim loads?

Similar Threads

  1. Caseta ON/OFF Switch and normal toggle switch
    By hgmobile in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 05-29-2016, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •