-
Originally Posted by
Armando B.
If you want to turn off the lights in the same button, the first line of the conditional should read:
- If sequence 1 is running Or
If sequence 2 is running
Then Stop Sequence 1
Stop Sequence 2
If you want to shut off the sequences from a separate button, just have it as a single option to "Stop Sequence" for both of them.
Thanks! Sometimes you look at something too long and make it harder than it is.
-
Thanks Armando! Here's the button:
If Security Day is running
-
Here's the button:
If Sec Day is running
Run Sec Day Off
If Sec is running
Run Sec Off
If Day = Day
Run Sec Day
Else Run Sec
How do I base the LED on either scene?
-
Authorized Lutron Contributor
When do you want the LED on the button to be on?
-
I've found an interesting way to adjust lights and then sort of revert back: Green mode with a short fade.
unfortuneatly it suffers at least two problems:
1) it is only designed to lower lights. I.e no such thing as a negative trim to raise lights.
2) it does not work with wpm modules on qs links (it works on rf link) as it is strangely hard coded to a 40 sec fade
i wanted to use this as a housecall button to get people's attention.
also wanted to tie in to doorbell as a visual indicator...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Originally Posted by
ekimla
I've found an interesting way to adjust lights and then sort of revert back: Green mode with a short fade.
unfortuneatly it suffers at least two problems:
1) it is only designed to lower lights. I.e no such thing as a negative trim to raise lights.
2) it does not work with wpm modules on qs links (it works on rf link) as it is strangely hard coded to a 40 sec fade
i wanted to use this as a housecall button to get people's attention.
also wanted to tie in to doorbell as a visual indicator...
Just wanted to bump this back at Lutron folks. Any plans to fix the hard coded 40s green mode fade on wired WPMs?? I really want this fixed. Also, would love to have green mode revised/improved to allow "negative trims". The doorbell and housecall features are begging for your attention!
-
Authorized Lutron Contributor
If you are a Lutron dealer, please pass feature feedback to our hwsupport@lutron.com email, or work with your Lutron Representative.
If you are a Lutron Representative, the best person to post this feedback to would be the Lutron sales person for your area, as they can work with our development teams to prioritize features.
-
Anyone know if we use say button 1 on a 3s hold to enable the Security mode and have security mode set to Lock devices including that keypad will that stop us unlocking the keypad
Scenario is a client wants the kids keypad locked when they press a lock button on that keypad, this is to stop them adjusting the current scene, if it was just one scene then it would be easy as I could set the light level via security mode.
I had hoped there might be the option to lock a area but it looks to be scene control, not sure what the unaffected option would do on there?
I do not have a current demo setup in the office and the job is 100+ miles away so can't play with it to see what works or dose not
-
Bump this one up because some scum spam posted 70+ messages last night 'Russelldv18' thanks a lot!!!...Moderator please bump that bot off