Thanks Thanks:  0
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 1 of 1

Thread: Execute Double Tap Programming without the Press programming

  1. #1
    Authorized Lutron Contributor
    Join Date
    May 2013

    Execute Double Tap Programming without the Press programming

    Whenever performing a double tap on the illuminations system, the system will first read the press and execute its programming if it has any. In order to ensure the double tap programming will execute without the press programming, you would have to create a conditional button.

    Attached is a sample project file with this functionality. The press preset should have a 1 second delay. The double tap preset should have no delay. The press tab should have the “Always” execute the preset. On the “double tap” preset, it should have the programming to “Always” “Stop/Halt” the press preset and then “Always” Execute the double tap preset.
    Attached Files Attached Files

  2. Likes LightBrigade, stevi liked this post

Similar Threads

  1. Press and Hold-Add a keypad or repeater Beep?
    By thefish in forum Programming - HWQS
    Replies: 4
    Last Post: 11-08-2013, 11:14 AM
  2. Scene turns on after off press....
    By guskousteris in forum Troubleshooting - RA2
    Replies: 12
    Last Post: 10-21-2013, 12:33 PM
  3. Programming local dimmers in HomeWorks QS
    By Craig W. in forum Programming - HWQS
    Replies: 1
    Last Post: 09-03-2013, 10:17 AM
  4. Questions for QSE-CI-NWK-E programming?
    By Blair S. in forum Programming - Shades
    Replies: 0
    Last Post: 07-05-2013, 06:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts