Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: How do I use a PHPM Load interface with Vive?

  1. #1
    Authorized Lutron Contributor
    Join Date
    Jan 2016
    Posts
    28

    How do I use a PHPM Load interface with Vive?

    Hello all,

    We have had a few customers call in asking how to use a Load interface with the Vive system for higher wattage loads or for compatible with specific lighting.

    Customers can use our MRF2S-6ELV120-XX Vive compatible Dimmer with a PHPM-PA-120-WH Load interface. Once installed the MRF2S-6ELV120-XX Dimmer will need to be programmed to have the High and Low-End trims adjusted for dimming performance.

    Joe

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    Joe M.- Would you also be able to dim the PHPM with the MRF2S-6ND-120-WH?
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  3. #3
    Authorized Lutron Contributor
    Join Date
    Jan 2016
    Posts
    28
    Quote Originally Posted by SanDiegoRep View Post
    Joe M.- Would you also be able to dim the PHPM with the MRF2S-6ND-120-WH?

    "MRF2S-6ND-120-XX" is not a valid product number at this point in time. The only Neutral based dimmer currently in the Vive product line is the MRF2S-6ELV120-XX. For a complete list of Vive Wallbox controls see our "Vive Cross Reference List".

    Joe

  4. Thanks SDR-Mike thanked for this post

Similar Threads

  1. Can I put to PHPM-PA-120-WH on to a RRD-10D dimmer?
    By RA2-Designer-Gal in forum Design Assistance - RA2
    Replies: 6
    Last Post: 03-23-2017, 04:41 PM
  2. RRD-H6BL and PHPM-PA-120 for LED Dimming
    By jfbordenjr in forum Design Assistance - RA2
    Replies: 5
    Last Post: 11-20-2015, 04:05 PM
  3. Replies: 1
    Last Post: 10-26-2015, 03:25 PM
  4. Help needed! 1000 Watts LEDs on RRD-10ND - do I need a PHPM-PA?
    By RA2-Designer-Gal in forum Design Assistance - RA2
    Replies: 6
    Last Post: 11-28-2014, 11:11 PM
  5. Replies: 1
    Last Post: 11-21-2013, 10:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •