Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Fan Default Speed RRD-2ANF

  1. #1
    Junior Member
    Join Date
    Jul 2016
    Posts
    12

    Fan Default Speed RRD-2ANF

    Anyone familiar with setting the default fan speed (RRD-2ANF) when the fan is first turned on using the top button? Using dimmers, I can set it but for the fan, it wants to set it at the 3rd option (1-off through 5-highest). Haven't installed fans until now... Ideas or not possible?
    Thanks!

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    Default is to Medium-High, but you can change that in the software.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  3. #3
    Junior Member
    Join Date
    Jul 2016
    Posts
    12
    I talked to tech support via phone and then they talked to engineering after we couldn't get it changed. The setting your talking about changing is for programming a keypad and not the button itself. There is no way to change the default setting when you press the button to turn on the fan. We even went to factory default and then joined/programmed it again, without success. It always reverts to the 3rd position (1-off,2,3-default,4-high) after joining/transferring when you first turn the fan on. This is odd because it should permit you to change this especially on a fan that is high on the ceiling in a large room...hate that as you enter, you hit button and papers go everwhere because the default is #3 not lower! ahhhh....

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    109
    I just discovered this quirk when trying to change the default fan speed on some controllers today. It seems like a pretty big oversight when you can do this with all of the dimmers. Is this something that can be fixed or a hardware/firmware limitation on the 2ANF?

  5. #5
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    You can always hit the raise rocker and cycle up to the desired speed.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  6. #6
    Senior Member
    Join Date
    Oct 2013
    Posts
    109
    Yeah, and I usually do that, or just whack it on and then take it down one level... but, being able to customize the default level of lights has got me spoiled!

Similar Threads

  1. Connect app startup speed?
    By wkearney99 in forum General Discussion - RA2
    Replies: 2
    Last Post: 05-07-2016, 01:16 PM
  2. Essentials 9.0 file download speed
    By Killing Switch in forum General Discussion - RA2
    Replies: 1
    Last Post: 06-16-2015, 09:32 AM
  3. Default On Level for 2ANF...
    By Swancoat in forum General Discussion - RA2
    Replies: 3
    Last Post: 06-02-2015, 05:29 PM
  4. Bus speed ?
    By mehuneau in forum General Discussion - HWQS
    Replies: 2
    Last Post: 05-09-2015, 02:15 AM
  5. buzzing noise from 3rd speed on RRD?2ANF
    By net_tech in forum General Discussion - RA2
    Replies: 9
    Last Post: 10-28-2014, 05:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •