Hi All,
Great forum with many knowledgeable folks! My first post.
My whole house except for my kitchen(legacy RadioRa) is now Caseta and it all works great !
I replaced a few legacy RadioRa dimmers and all that is left is a Kitchen Grafik eye with 6 zones, 3 power modules for ELV and two remote keypads controlling it.
Keypad 1 is wireless radioRA and will likely be junked.
Keypad 2 is hardwired to Grafik eye by elv cable I assume.
Is there an option to:
1) Add in a hybrid type keypad that will hardwire and control the Grafik eye as well be wirelessly controlled by either Caseta or a new RadioRA2
2) am I stuck getting a RadioRa2 Grafik eye - I assume I can use the existing 4 button with dimming wired keypad. plus a Ra2 bridge and a wireless keypad - costly and now I have invested in another ecosystem. plus this won't talk to caseta
I use Alarm.com also which lets me control the casetas with workflow and rules. In theory a RadioRa2 install can exist with Caseta with Alarm.com being the main hub, correct?
essentially I am trying to avoid ripping out the old RadioRA grafik eye(4 gang size) out of the kitchen and adding 6 casita dimmers in another location and covering the hole up - plus I am stuck with the Picos which don't even compare to the lit keypads.
Also, I would rather not end up with a new mini RadioRa2 install for just the kitchen while the whole house is caseta.
But I do want ALL lights "centrally" automated as possible.
thoughts?