Has anyone seen issues with the LED's on keypads not responding as expected with 5.2.0? I have a number of keypads in a project that have particular buttons whose LED feedback is not functioning. System has been up and running for a year and do not recall seeing this issue with 4.2.2.
Not all the buttons on the keypads have issues (some keypads will only have a problem with one button) and all are programmed differently (some are set to ROOM, some DEFINED BY SEQUENCE). Additionally there are other buttons in the system set up exactly as some of the problematic buttons and the LEDs work as expected.
Most buttons simply light up the LED and then it will quickly extinguish (as if there is no programming on the button). The programming on the button will engage as expected. I have one button that actually just stays lit no matter what but the majority will not stay lit as expected.
I've tried deleting the button logic, and then adding the same logic back but this does not fix the issue. Started a case with lutron but thought I would post here as well. Thanks.