Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Wrong DMX LED light % feedback in Home Control+ App

  1. #1

    Wrong DMX LED light % feedback in Home Control+ App

    I have some LED lights connected to a DMX LED driver via a QSE-CI-DMX to a HomeWorks QS system. I noticed the following behavior:

    1. From a Lutorn keypad a select a scene which turns on the LED lights at 25%.
    2. I open the Lutron Home Control+ app V9.9 and all LED's are at 25%.
    3. I press the Master Lower button on the keypad several times and every press the dimming % is lowered with ~5%.
    4. When the app is showing 0% the lights are still on.

    It looks like in reality the LED's only dim 1% per press but the app shows steps of ~5%.
    I tested this with different DMX drivers but the problem remains the same.

    Is this a known issue?

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello William Bouman,
    Thank you for your post. I do believe this is a known issue with how HWQS integrates with DMX. I am awaiting confirmation from engineering. I will post back once I have an answer.

Similar Threads

  1. Replies: 0
    Last Post: 02-02-2015, 03:56 PM
  2. Maestro dimmer controlling wrong lights
    By latrones in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 12-13-2014, 04:11 PM
  3. Lack of feedback status in Home+ app
    By Pgeengr in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 11-19-2014, 08:12 PM
  4. 3rd Party Control feedback?
    By digit1 in forum 3rd-party Integration - Legacy HW
    Replies: 2
    Last Post: 02-17-2014, 11:52 AM
  5. Maestro fan/light control
    By Mike S. in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-19-2013, 01:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •