Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Press, Hold, Release Event

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    15

    Press, Hold, Release Event

    I need to give a press, hold and release event via the integration interface to a third party.
    Is a single action button with a variable on the press on action and the hold action the right way?
    Are the events then visible on the integration interface by monitoring:
    ~DEVICE,<ID>,<BUTTON>,3 = press,
    ~DEVICE,<ID>,<BUTTON>,4 = release
    ~DEVICE,<ID>,<BUTTON>,5 = hold

    thanks
    Frank

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hello franlog,
    Thank you for your post.
    You are on the right track. Adding the variable will give the button some form of programming so it can then report the feedback.

Similar Threads

  1. How do I change my timeclock event?
    By Rob L. in forum Programming - Quantum
    Replies: 3
    Last Post: 10-16-2020, 03:28 AM
  2. Program Cycle Dim as a Conditional on a Button Press/Release
    By Armando B. in forum Programming - HWQS
    Replies: 1
    Last Post: 10-30-2015, 12:29 PM
  3. Incrementing Event Indexes
    By MegaAutoBit in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 06-15-2015, 08:28 PM
  4. Press On/Press Off Macro
    By TurnipTruck in forum Programming - HWQS
    Replies: 5
    Last Post: 01-18-2014, 10:54 AM
  5. Press and Hold-Add a keypad or repeater Beep?
    By thefish in forum Programming - HWQS
    Replies: 4
    Last Post: 11-08-2013, 11:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •