Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Sivoia QS Triathlon - adding to existing system

  1. #1

    Sivoia QS Triathlon - adding to existing system

    I will be adding this shade to an existing pro hub installation. The roller shade in question will be remote powered rather than battery and the shade will be high up and in a very difficult to reach area. My question is about adding the shade to the system - do i need to press some button on the shade to pair it to the Caseta Pro Hub? or is the pairing done at the remote Lutron plug in power supply? If its on the shade assembly then I need to be home when the installers are up on the ladders. Thanks in advance.

  2. #2
    Button is on the shade. Open the app, tap "Settings", "Add Device", select shade - you will see picture and instructions.

  3. #3
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    635
    veeeh is correct. You need to tap a button on the shade to program it to the Pro Bridge. See Page 2, Section 6 of http://www.lutron.com/TechnicalDocum...ller-Shade.pdf to see the location of the button. If you are planning on controlling this with a Pico remote as well, don't follow these attached instructions. Add the shade into the app first, then add the Pico into the app and assign the shade to it in the app.

Similar Threads

  1. Adding GRAFIK Eye QS to RadioRA2 system
    By Corey in forum General Discussion - RA2
    Replies: 1
    Last Post: 04-10-2015, 10:21 PM
  2. SIVOIA QS Wireless Triathlon Control
    By Chinedu in forum Design Assistance - Shades
    Replies: 1
    Last Post: 11-03-2014, 01:55 PM
  3. Adding a keypad to RadioRa2 system - electrical requirements?
    By geofry in forum Design Assistance - RA2
    Replies: 5
    Last Post: 09-30-2014, 05:38 PM
  4. Adding Triathlon shades to Ra2
    By Connected in forum General Discussion - RA2
    Replies: 1
    Last Post: 03-04-2014, 03:01 PM
  5. Upgrading from an Existing System to HomeWorks QS
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 03-03-2014, 04:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •