Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: IR

  1. #1
    Junior Member
    Join Date
    Jan 2015
    Posts
    12

    IR

    I have a situation where someone is using a Harmony Ultimate One remote to control all their AV equipment. They want to be able also to turn off the amp for the subwoofer and a HD matrix. Is there a way to implement control of a LMK-16R-DV-B relay via infrared. They would also like to have a button on a keypad to turn them off.

  2. #2
    If you have a qs link, you can use a HQWD-W5BIR keypad to serve as an IR input. You then program the buttons and/or IR input to control whatever you want in the HWQS system. You would need to have the remote send Lutron IR codes, but many of the remotes have them.

    The LMK-16R-DV-B would go on an RF link on the processor, and communicate via the repeater. The RF keypad does not have an IR input, so would need to use wired.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •