-
silvio qs, qse, pico, shade dongle, crestrom - how to set all in one...?
Hi,
I'm looking for a solution, and i cannot find the right answer...
I have 7 silvio qs shades, connected to shade panel, and qse-nwk - I have made phantom buttons for that, and it's working, i'm controling it over telnet from crestron...
but how i can add a pico remote to the system? i see shade_dongle in ?details, all_devices, i have add integration id, but i don't see that buttons were pressed. When it was in standalone system, everything was working, remote's and shades was working, after connecting qse it stopped. and now i really don't have any idea what to do to connect them together..?
thank you for any help
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Authorized Lutron Contributor
You can add a PICO to a stand-alone QS wired shading system. You would need to add a QSM RF interface to the QS wired link, then follow the instructions in Application note #463. This link can be found by typing "App 463" in the lutron.com search window.
This should not interfere with the current QSE-CI-NWK-E commands. The PICO will not be seen by the NWK interface.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes