Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Mounting of DIN Rail Dimming/Switching Modules

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    19

    Mounting of DIN Rail Dimming/Switching Modules

    For the LQSE-4A1-D etc., I am wondering what enclosures anyone out there might be using for these. Internet searches have not been productive. I am hoping to find some sort of recessed metal, (or plastic), enclosure that still has the front exposure for the center section of the module. All I am finding are plastic surface mount enclosures. The Lutron enclosure for the DALI and ECO modules is not rated for dimming modules, as it does not provide the necessary low VS line voltage separation or protection.

    The reason this came up is a couple of projects we are doing really would benefit from locating "local" dimming modules in closets etc. as wiring to a central location is very difficult. In the past we used WPMs, but with all the LED fixtures, and more importantly retrofit LED lamps, we are finding it necessary to use adaptive modules almost exclusively, which eliminates the WPM as a realistic solution. Without an "in wall" recessed solution, (no interior designer we have spoken with would ever sign off on the surface mount options), we're stuck with ganging up a bunch of individual dimmers, and that's just not a solution.

  2. #2
    Junior Member
    Join Date
    Dec 2013
    Posts
    29
    Try Pragma flush mounting from Schneider Electric. They do a 1 row 13 unit wide enclosure.

Similar Threads

  1. QS 9.3 DIN Rail Phase Adaptive modules
    By Tony Sena in forum Design Assistance - HWQS
    Replies: 5
    Last Post: 03-29-2016, 07:26 PM
  2. PNL-8 DIN Rail Blocks
    By Adam Owens in forum General Discussion - HWQS
    Replies: 3
    Last Post: 09-28-2014, 10:49 PM
  3. Dynamic Keypad Mounting Frame
    By Armando B. in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 05-28-2014, 12:42 PM
  4. Switching on 4A or 4U
    By itsthebombbee in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 04-25-2014, 07:04 PM
  5. DIN Rail Power Modules
    By BradKas in forum General Discussion - HWQS
    Replies: 1
    Last Post: 04-14-2014, 03:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •