Results 1 to 2 of 2

Thread: Network wiring QSGRJ-4P to QSE-CI-NWK-E

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    1

    Question Network wiring QSGRJ-4P to QSE-CI-NWK-E

    Hi to everyone, i need some help.

    I have to wire the network from QSGRJ-4P-TXX* to QSE-CI-NWK-E. I need to know if I can use cable UTP cat6 instead of GRX-CBL-346S. If not, what other cable can I use? Cable GRX-CBL-346S is not available and cannot be imported to Argentina.I have to wire the network from QSGRJ-4P-TXX* to QSE-CI-NWK-E. I need to know if I can use cable UTP cat6 instead of GRX-CBL-346S. If not, what other cable can I use? Cable GRX-CBL-346S is not available and cannot be imported to Argentina.

    Marcos.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    You can use a cable available to you that meets the specs for the GRX-CBL-346S:

    Two pair — one pair 18 AWG (0.75 mm2), one pair 18 to 22 AWG
    (0.34 to 0.75 mm2) twisted shielded — IEC PELV / NEC® Class 2 cable

Similar Threads

  1. Keypad wiring redundancy
    By Ty W. in forum Best Practices - HWQS
    Replies: 11
    Last Post: 03-31-2017, 12:40 PM
  2. QS & shade wiring
    By Tony Sena in forum Best Practices - HWQS
    Replies: 1
    Last Post: 06-26-2013, 06:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •