Results 1 to 4 of 4

Thread: Controlling RGB LED Tape Light

  1. #1

    Controlling RGB LED Tape Light

    Is it possible to control the color change thru RR2 and can this be controlled thru the app?

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    208
    Unfortunately we do not have a way to control RGB DMX lights through Radio Ra2, only Homeworks QS.

  3. #3
    Could you use a Grafik Eye QS with QSE-CI-DMX and have that in a RR2 system? By reading info on the QSE-CI-DMX you could control 3-channels simultaneously on a zone and intensity on another zone. With a 6 zone GE you could control 3 DMX controllers with color changing and intensity.

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    208
    This would not work because once the Grafikeye is activated into the Radio Ra2 system, it disables the QS link on the back of the Grafikeye. You could use a Grafikeye QS as a stand-alone and use the QSE-CI-DMX, but it would not respond to button presses from the Radio Ra2 system.

Similar Threads

  1. LED tape lights for RadioRA 2 and GrafikEye QS
    By ultravelocity in forum General Discussion - LED
    Replies: 11
    Last Post: 03-24-2017, 01:28 AM
  2. LED ribbon/tape lighting recommendations
    By trx250r87 in forum General Discussion - RA2
    Replies: 5
    Last Post: 07-20-2016, 11:48 AM
  3. LED Tape recommendations?
    By AndyM in forum Design Assistance - HWQS
    Replies: 3
    Last Post: 04-09-2016, 04:44 PM
  4. Tape lights stay on at low levels even when Maestro CL goes off
    By Tom B in forum Performance Issues - LED
    Replies: 3
    Last Post: 03-29-2016, 04:21 PM
  5. Caseta controlling 0-10 volt dimming light... possible workaround??
    By Automate in forum Design Assistance - CAS
    Replies: 8
    Last Post: 11-02-2015, 01:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •