Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: LMJ-5T-DV-B to dim 0-10V LED fixture

  1. #1
    Senior Member
    Join Date
    Oct 2015
    Posts
    100

    Question LMJ-5T-DV-B to dim 0-10V LED fixture

    Hello, we need to dim a bunch of LED recessed lights and the housing is dimmable using 0-10V technique. For a RA2 system the only option we have is to add a LMJ-5T-DV-B controlled via a seeTouch keypad. The spec of the LMJ module mentions a max load of 5A, so at 120VAC that would give us around 600VA or roughly 600W. Assuming we have 22 housings consuming each 15W, total 330W, are we good to go? Thank you.

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    Your math looks right. Shouldn't have a problem on the 0-10v side either.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

Similar Threads

  1. Dual 0-10V inputs on a fixture
    By Craig W. in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 08-04-2015, 09:08 PM
  2. Switch for CFL Light Fixture
    By Corey in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 06-16-2015, 09:42 AM
  3. Replies: 1
    Last Post: 06-01-2015, 10:13 AM
  4. Fluorescent fixture
    By tbone in forum General Discussion - CAS
    Replies: 1
    Last Post: 01-09-2015, 09:27 AM
  5. Replies: 0
    Last Post: 03-20-2014, 12:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •